-
Product Overview-ZGM Pulverizer Coupling Pin 20MG40.11.02.J
The is a specialized core spare part for the main reducer coupling of ZGM-type medium-speed roller coal pulverizers. Its primary functions include torque transmission¥ 0.00Buy Now
-
ZGM113N Mill Hinge Shaft 20MG40.11.11.02 High-Toughness Transmission Pivot
The Hinge Shaft 20MG40.11.11.02 is a core transmission spare part for the ZGM113N medium-speed coal mill.¥ 0.00Buy Now
-
Maintenance Guide and Technical Specifications for 20MG42.11.09 ZGM Coal Mill Grinding Roller Sleeve
The roller sleeve 20MG42.11.09 for Bowl-Type Medium-Speed Coal Mills is a core grinding component of the ZGM series.¥ 0.00Buy Now
-
20MG60.11.12.06.02 ZGM Medium-speed Pulverizer Upper Seal Sleeve
In the sealing and protection system of the ZGM Medium-speed Pulverizer, the Upper Seal Sleeve (Part No. 20MG60.11.12.06.02) is a critical component located in the upper grinding zone.¥ 0.00Buy Now
-
Specialized Stud Bolt 2Cr1Mo1VNbTiB-Alloy Fastener for Steam Turbine Flanges
As core power equipment in power plants, steam turbines operate under extreme conditions characterized by high temperatures, high pressures, high rotational speeds, and thermal fatigue.¥ 0.00Buy Now
-
Superheater Sliding Block ZG1Cr20Ni14Si2- Power Plant Boiler Anti-Seize Support and Positioning Component
The boiler superheater system operates under severe conditions characterized by high temperature, high pressure, steam erosion, and thermal expansion displacement.¥ 0.00Buy Now
-
Slotted Countersunk Head Screw GB68C-76 M6x26mm for Steam Turbine Assemblies
The Steam Turbine Screw GB68C-76 M6x26mm is a high-standard fastener specifically engineered for the connection of steam turbines and their associated precision mechanical equipment.¥ 0.00Buy Now
-
Cooling Fan Impeller 5-29N0.5A -Directional Aerodynamics and Industrial Component Synergy
The Cooling Fan Impeller 5-29N0.5A is a high-efficiency core component specifically designed for industrial ventilation and heat exchange systems.¥ 0.00Buy Now
-
Stop Pump Leaks: A Maintenance Guide for the HZB253-640-01-13 Shaft Sleeve
Prevent booster pump shutdowns. Learn how to spot HZB253-640-01-13 shaft sleeve erosion, pitting, and vibration issues before they ruin your mechanical seals.
넶0 2026-02-02 -
Stability Principles of the HD452D11 Sliding Bearing Under Extreme Dynamic Loads
Master the HD452D11 sliding bearing. Learn how its oil film and anti-vibration design protect feed pump shafts from wear under high-speed power plant loads.
넶2 2026-01-31 -
FA1D56A-00-1/4 Gasket: Fitting and Shock Protection for Pump Seal Chambers
Stop leaks in your feed pump seal water chamber. Learn how the FA1D56A-00-1/4 gasket matches your pump to resist pressure jumps and cavitation shocks.
넶1 2026-01-31 -
HPT200-300-05-01A-00 Oil Seal Assembly: Tips for Stopping Leaks After a Swap
Stop pump leaks for good. Learn how to install the HPT200-300-05-01A-00 oil seal assembly correctly, avoid common mistakes, and check for a perfect seal.
넶1 2026-01-28
